3. Managing Packages

Adding packages

There are two ways of adding packages, either using the add command or the dev command. The most frequently used is add and its usage is described first.

Adding registered packages

In the Pkg REPL, packages can be added with the add command followed by the name of the package, for example:

(v1.0) pkg> add Example
   Cloning default registries into /Users/kristoffer/.julia/registries
   Cloning registry General from "https://github.com/JuliaRegistries/General.git"
  Updating registry at `~/.julia/registries/General`
  Updating git-repo `https://github.com/JuliaRegistries/General.git`
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] + Example v0.5.1
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] + Example v0.5.1
  [8dfed614] + Test

Here we added the package Example to the current project. In this example, we are using a fresh Julia installation, and this is our first time adding a package using Pkg. By default, Pkg clones Julia's General registry, and uses this registry to look up packages requested for inclusion in the current environment. The status update shows a short form of the package UUID to the left, then the package name, and the version. Since standard libraries (e.g. Test) are shipped with Julia, they do not have a version. The project status contains the packages you have added yourself, in this case, Example:

(v1.0) pkg> st
    Status `Project.toml`
  [7876af07] Example v0.5.1

The manifest status shows all the packages in the environment, including recursive dependencies:

(v1.0) pkg> st --manifest
    Status `Manifest.toml`
  [7876af07] Example v0.5.1
  [8dfed614] Test

It is possible to add multiple packages in one command as pkg> add A B C.

After a package is added to the project, it can be loaded in Julia:

julia> using Example

julia> Example.hello("User")
"Hello, User"

A specific version can be installed by appending a version after a @ symbol, e.g. @v0.4, to the package name:

(v1.0) pkg> add Example@0.4
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] + Example v0.4.1
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] + Example v0.4.1

If a branch (or a certain commit) of Example has a hotfix that is not yet included in a registered version, we can explicitly track that branch (or commit) by appending #branchname (or #commitSHA1) to the package name:

(v1.0) pkg> add Example#master
  Updating git-repo `https://github.com/JuliaLang/Example.jl.git`
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] ~ Example v0.5.1 ⇒ v0.5.1+ #master (https://github.com/JuliaLang/Example.jl.git)
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] ~ Example v0.5.1 ⇒ v0.5.1+ #master (https://github.com/JuliaLang/Example.jl.git)

The status output now shows that we are tracking the master branch of Example. When updating packages, we will pull updates from that branch.

To go back to tracking the registry version of Example, the command free is used:

(v1.0) pkg> free Example
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] ~ Example v0.5.1+ #master (https://github.com/JuliaLang/Example.jl.git) ⇒ v0.5.1
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] ~ Example v0.5.1+ #master )https://github.com/JuliaLang/Example.jl.git) ⇒ v0.5.1

Adding unregistered packages

If a package is not in a registry, it can be added by specifying a URL to the repository:

(v1.0) pkg> add https://github.com/fredrikekre/ImportMacros.jl
  Updating git-repo `https://github.com/fredrikekre/ImportMacros.jl`
 Resolving package versions...
Downloaded MacroTools ─ v0.4.1
  Updating `~/.julia/environments/v1.0/Project.toml`
  [e6797606] + ImportMacros v0.0.0 # (https://github.com/fredrikekre/ImportMacros.jl)
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [e6797606] + ImportMacros v0.0.0 # (https://github.com/fredrikekre/ImportMacros.jl)
  [1914dd2f] + MacroTools v0.4.1

The dependencies of the unregistered package (here MacroTools) got installed. For unregistered packages we could have given a branch name (or commit SHA1) to track using #, just like for registered packages.

Adding a local package

Instead of giving a URL of a git repo to add we could instead have given a local path to a git repo. This works similar to adding a URL. The local repository will be tracked (at some branch) and updates from that local repo are pulled when packages are updated. Note tracking a package through add is distinct from develop: changes to files in the local package repository will not immediately be reflected when loading that package. The changes would have to be committed and the packages updated in order to pull in the changes.

In addition, it is possible to add packages relatively to the Manifest.toml file, see Developing packages for an example.

Developing packages

By only using add your Manifest will always have a "reproducible state", in other words, as long as the repositories and registries used are still accessible it is possible to retrieve the exact state of all the dependencies in the project. This has the advantage that you can send your project (Project.toml and Manifest.toml) to someone else and they can "instantiate" that project in the same state as you had it locally. However, when you are developing a package, it is more convenient to load packages at their current state at some path. For this reason, the dev command exists.

Let's try to dev a registered package:

(v1.0) pkg> dev Example
  Updating git-repo `https://github.com/JuliaLang/Example.jl.git`
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] + Example v0.5.1+ [`~/.julia/dev/Example`]
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] + Example v0.5.1+ [`~/.julia/dev/Example`]

The dev command fetches a full clone of the package to ~/.julia/dev/ (the path can be changed by setting the environment variable JULIA_PKG_DEVDIR). When importing Example julia will now import it from ~/.julia/dev/Example and whatever local changes have been made to the files in that path are consequently reflected in the code loaded. When we used add we said that we tracked the package repository, we here say that we track the path itself. Note the package manager will never touch any of the files at a tracked path. It is therefore up to you to pull updates, change branches etc. If we try to dev a package at some branch that already exists at ~/.julia/dev/ the package manager we will simply use the existing path. For example:

(v1.0) pkg> dev Example
  Updating git-repo `https://github.com/JuliaLang/Example.jl.git`
[ Info: Path `/Users/kristoffer/.julia/dev/Example` exists and looks like the correct package, using existing path instead of cloning

Note the info message saying that it is using the existing path. When tracking a path, the package manager will never modify the files at that path.

If dev is used on a local path, that path to that package is recorded and used when loading that package. The path will be recorded relative to the project file, unless it is given as an absolute path.

To stop tracking a path and use the registered version again, use free:

(v1.0) pkg> free Example
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] ↓ Example v0.5.1+ [`~/.julia/dev/Example`] ⇒ v0.5.1
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] ↓ Example v0.5.1+ [`~/.julia/dev/Example`] ⇒ v0.5.1

It should be pointed out that by using dev your project is now inherently stateful. Its state depends on the current content of the files at the path and the manifest cannot be "instantiated" by someone else without knowing the exact content of all the packages that are tracking a path.

Note that if you add a dependency to a package that tracks a local path, the Manifest (which contains the whole dependency graph) will become out of sync with the actual dependency graph. This means that the package will not be able to load that dependency since it is not recorded in the Manifest. To synchronize the Manifest, use the REPL command resolve.

In addition to absolute paths, add and dev can accept relative paths to packages. In this case, the relative path from the active project to the package is stored. This approach is useful when the relative location of tracked dependencies is more important than their absolute location. For example, the tracked dependencies can be stored inside of the active project directory. The whole directory can be moved and Pkg will still be able to find the dependencies because their path relative to the active project is preserved even though their absolute path has changed.

Removing packages

Packages can be removed from the current project by using pkg> rm Package. This will only remove packages that exist in the project; to remove a package that only exists as a dependency use pkg> rm --manifest DepPackage. Note that this will remove all packages that depend on DepPackage.

Updating packages

When new versions of packages that the project is using are released, it is a good idea to update. Simply calling up will try to update all the dependencies of the project to the latest compatible version. Sometimes this is not what you want. You can specify a subset of the dependencies to upgrade by giving them as arguments to up, e.g:

(v1.0) pkg> up Example

If Example has a dependency which is also a dependency for another explicitly added package, that dependency will not be updated. If you only want to update the minor version of packages, to reduce the risk that your project breaks, you can give the --minor flag, e.g:

(v1.0) pkg> up --minor Example

Packages that track a local repository are not updated when a minor upgrade is done. Packages that track a path are never touched by the package manager.

Pinning a package

A pinned package will never be updated. A package can be pinned using pin, for example:

(v1.0) pkg> pin Example
 Resolving package versions...
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] ~ Example v0.5.1 ⇒ v0.5.1 ⚲
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] ~ Example v0.5.1 ⇒ v0.5.1 ⚲

Note the pin symbol ⚲ showing that the package is pinned. Removing the pin is done using free

(v1.0) pkg> free Example
  Updating `~/.julia/environments/v1.0/Project.toml`
  [7876af07] ~ Example v0.5.1 ⚲ ⇒ v0.5.1
  Updating `~/.julia/environments/v1.0/Manifest.toml`
  [7876af07] ~ Example v0.5.1 ⚲ ⇒ v0.5.1

Testing packages

The tests for a package can be run using testcommand:

(v1.0) pkg> test Example
   Testing Example
   Testing Example tests passed

Building packages

The build step of a package is automatically run when a package is first installed. The output of the build process is directed to a file. To explicitly run the build step for a package, the build command is used:

(v1.0) pkg> build MbedTLS
  Building MbedTLS → `~/.julia/packages/MbedTLS/h1Vu/deps/build.log`

julia> print(read("~/.julia/packages/MbedTLS/h1Vu/deps/build.log", String))
┌ Warning: `wait(t::Task)` is deprecated, use `fetch(t)` instead.
│   caller = macro expansion at OutputCollector.jl:63 [inlined]
└ @ Core OutputCollector.jl:63
...
[ Info: using prebuilt binaries

Garbage collecting old, unused packages

As packages are updated and projects are deleted, installed package versions and artifacts that were once used will inevitably become old and not used from any existing project. Pkg keeps a log of all projects used so it can go through the log and see exactly which projects still exist and what packages/artifacts those projects used. If a package or artifact is not marked as used by any project, it is added to a list of orphaned packages. Packages and artifacts that are in the orphan list for 30 days without being used again are deleted from the system on the next garbage collection. This timing is configurable via the collect_delay keyword argument to Pkg.gc(). A value of 0 will cause anything currently not in use immediately, skipping the orphans list entirely; If you are short on disk space and want to clean out as many unused packages and artifacts as possible, you may want to try this, but if you need these versions again, you will have to download them again. To run a typical garbage collection with default arguments, simply use the gc command at the pkg> REPL:

(v1.0) pkg> gc
    Active manifests at:
        `~/BinaryProvider/Manifest.toml`
        ...
        `~/Compat.jl/Manifest.toml`
    Active artifacts:
        `~/src/MyProject/Artifacts.toml`

    Deleted ~/.julia/packages/BenchmarkTools/1cAj: 146.302 KiB
    Deleted ~/.julia/packages/Cassette/BXVB: 795.557 KiB
   ...
   Deleted `~/.julia/artifacts/e44cdf2579a92ad5cbacd1cddb7414c8b9d2e24e` (152.253 KiB)
   Deleted `~/.julia/artifacts/f2df5266567842bbb8a06acca56bcabf813cd73f` (21.536 MiB)

   Deleted 36 package installations (113.205 MiB)
   Deleted 15 artifact installations (20.759 GiB)

Note that only packages in ~/.julia/packages are deleted.